107
APPENDIKS
01. Strøm k a 00 ~ 01
02. Billedformat k c
Se s. 108
03. Stand by-modus k d 00 ~ 01
04. Højttaler fra k e 00 ~ 01
05. Volumenkontrol k f 00 ~ 64
06. Kontrast k g 00 ~ 64
07. Lys k h 00 ~ 64
08. Farve k i 00 ~ 64
09. Farvetemperatur k j 00 ~ 64
10. Skarphed k k 00 ~ 64
11. Valg af skærmmenu k l 00 ~ 01
12.
Remote control lock mode
k m 00 ~ 01
13. Balance k t 00 ~ 64
14.
arvetemperatur
k u 00 ~ 02
15. Unormal status k z 00 ~ 09
16. Automatisk konfiguration j u 01
17. Equalizer j v
Se s. 110
18. Finindstillingskommando m a
Se s. 110
19. Tilføj/spring over kanal m b 00 ~ 01
20. Nøgle m c
Send IR-ledning
21. Styring af modlys m g 00 ~ 64
22.
Vælg signalkilde (hovedbillede) xbSe s. 111
Communication Parameters
A
Baud rate : 9600 bps
(
UART
)
A
Data length : 8 bits
A
Parity : None
A
Stop bit : 1 bit
A
Communication code : ASCII code
A
Use a crossed (reverse) cable.
Transmission
*
[Command 1] : First command to control the TV.
(j, k, m or x)
*
[Command 2] : Second command to control the TV.
*
[Set ID] : You can adjust the set ID to choose
desired monitor ID number in option
menu. Adjustment range is 1 ~ 99.
When selecting Set ID ‘0’, every
connected set is controlled.
Set ID is indicated as decimal (1~99)
on menu and as Hexa decimal
(0x0~0x63) on transmission/
receiving protocol.
*
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of
command.
*
[Cr] : Carriage Return
ASCII code ‘0x0D’
*
[ ] : ASCII code ‘space (0x20)’
[Command1][Command2][ ][Set ID][ ][Data][Cr]
OK Acknowledgement
* The TV transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is data read mode, it indicates present status
data. If the data is data write mode, it returns the data
of the PC computer.
[Command2][ ][Set ID][ ][OK][Data][x]
Error Acknowledgement
* The TV transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
nonviable functions or communication errors.
[Command2][ ][Set ID][ ][NG][Data][x]
Transmission / Receiving ProtocolCommand Reference List
*
Når du indstiller 15 ~ 22, vises der ikke en menu på skærmen.
COMMAND
1
COMMAND
2
DATA
(Hexadecimal)
