6
Setup Guide
6. Push down the clamp until it locks in place.
7. Press the X color cleaning button. The print heads move to
the left again so you can install the color ink cartidge.
8. Follow steps 3 through 6 to install the color ink cartridge.
9. Press the E load eject button.
The printer moves the print heads and begins charging the ink
delivery system. The P power light flashes, and the printer
makes various sounds. Charging takes up to 7 minutes. Don’t
turn off the printer or interrupt this important process or
you’ll use up more ink than necessary. When it’s finished, you
can close the printer cover.
load/eject
button
black
cleaning
button
color
cleaning
button
Caution:
Never turn off the printer
when the
P
power light
is flashing. However if
the
P
power light is still
flashing after 10
minutes and the printer
is not moving or making
noise, you may turn off
the printer.
QuikSet2.fm Page 6 Wednesday, October 15, 1997 3:49 PM
