EPSON Stylus COLOR 800N
6 -
EPSON Stylus COLOR 800N
10/97
Using Hex Dump Mode
You can use the printer’s hex dump mode to identify problems
if you know how to interpret hex code. Or, you can fax the
hex printout to a technical support representative. Follow
these steps to use hex dump mode:
1. Make sure the printer is turned off and has paper in the
feeder.
2. Open the cover.
3. Hold down the
E load/eject button and the X color cleaning
button and press the
Ppower button. The printer prints
Hex Dump Mode at the top of a page and then stops.
4. Print one or more pages from an application as usual. The
printer prints the exact code it receives in hexadecimal
format.
Default Control Panel Settings
You can change the following “default” settings from the
printer’s control panel:
Changing control panel settings
Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded.
2. Hold down the
X color cleaning button and press the
power button. The printer prints a summary of
instructions for changing settings and choosing the
language to use for additional instructions.
3. Press the
X color cleaning button to print a list of current
settings and additional instructions.
4. After you make the changes you want, turn the printer off
to save the settings. The settings remain in effect until you
change them again.
Printing an Ethernet Card Status
Sheet
You can print a status sheet to see information about your
Ethernet card including the serial number, node address, and
network information. You need the status sheet information
to configure your card. Follow these steps:
1. Make sure the printer is turned on and has paper in the
feeder.
2. Press the status sheet button to print out the status sheet.
Replacing an Ink Cartridge
When a B black or A color ink out light flashes, the indicated
cartridge is low on ink. This is a good time to make sure you
have a new cartridge. When the light stays on, the cartridge is
empty and you need to replace it.
Caution:
To ensure good results, use genuine EPSON
cartridges and do not refill them. Other products may
cause damage to your printer not covered by EPSON’s
warranty.
Use these EPSON ink cartridges within six months of
installing them and before the expiration date on the package:
❏ Black ink cartridge S020108
❏ Color ink cartridge S020089
When the
A color ink out light comes on, you can continue
to print with black ink. Simply turn the printer off and then
back on again. When you print, make sure you choose Black
as the Ink setting in your printer software.
Setting Options
Print direction Auto, Bi-D, Uni-D
Font Courier, Roman, Sans Serif, Prestige,
Script, Roman T, Sans Serif H, Draft
Pitch 10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
I/F mode Auto, Parallel, Serial, Option
Auto I/F wait time 10 seconds, 30 seconds
Software ESC/P 2, IBM X24E
Auto CR (IBM mode only) Off, On
AGM (IBM mode only) Off, On
Character table PC437, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Roman 8, ISO
Latin 1, Italic U.S.A., Italic France, Italic
Germany, Italic U.K., Italic Denmark 1, Italic
Sweden, Italic Italy, Italic Spain 1
Auto line feed Off, On
Network I/F mode Off, On
Loading position 8.5 mm, 3 mm, Others
Economy Off, On
Parallel I/F transfer rate Fast, Normal
status sheet button
