Notice
When you install the ink cartridge for the first time (just after unpacking the printer), please
perform the following steps in addition to the steps described in your user’s guide.
After step 4 on page l-10 (after you hold down the
REPLACE INK
button and the
carriage moves to the middle of the printer) do the following:
Turn the paper-thickness lever clockwise as far as it will go, as shown below.
Next go on to the next step (step 5 on page l-10). Proceed with steps as written in the
manual until you reach step
11.
After the printer finishes the cleaning procedure in step
11
on page
1-13,
perform the
following additional steps:
Hold down the
REPLACE INK
button until the carriage moves to the middle
position.
Turn the paper-thickness lever all the way to the left (counterclockwise).
Press the
REPLACE INK
button again to return the carriage to the far right
position.
Go on to the next step (step
12
on page
1-13).
Note: You do not need to do these additional steps when you
rephce
the ink autridgc.
Copyright
0
1993
by Seiko Epson Corp.
