14. Installing Controller Options
286 EPSON RC+ 5.0 (Ver.5.4) User's Guide Rev.4
15. Installing Controller Options
When you purchase options with your system, the options are already installed on your
system. However, you can enable additional options on site.
The RC180 Controller has option software keys that are enabled from EPSON RC+ 5.0.
To see what options are enabled on your system, select Setup | Controller | Options. The
following dialog will be displayed, showing which options are enabled.
Item Description
Option Name of the option.
Enabled Indicates that the option is enabled in the controller.
To enable an option on site
1. Write down the controller options key code. You can view this from the Setup |
Controller | Options page.
2. Call your distributor to purchase the option and give him the options code.
3. You will receive a code to enable the option from your distributor.
4. Select the option to enable on the grid, and then click the Enable button.
5. Enter in the code you received from your distributor.
Key code is case sensitive.
Enabling an option
NOTE
