191
BRAKES
DRAINING, FILLING AND BLEEDING THE BRAKING SYSTEM
Tools.
[1] Generic bleeding apparatus : «LURO» or similar
[2] LEXIA station : 4171-T
[3] PROXIA station : 4165-T
NOTE: Bleeding of the secondary braking circuit is done with the help of diagnostic tools [2] or [3].
Draining the brake fluid reservoir.
Disconnect the battery.
Remove the engine cover (1) and the lid (2).
Disconnect the connector «a».
Take out the filter of the brake fluid reservoir (4).
Drain the brake fluid reservoir (1) to the maximum extent (if necessary, use a clean syringe).
Remove the pin (3) and the brake fluid reservoir (4).
Clean the brake fluid reservoir (4).
Refit the brake fluid reservoir (4), the pin (3) and the filter of the brake fluid reservoir.
Reconnect the connector.
Reconnect the battery.
IMPERATIVE: Perform the operations that are necessary following a reconnection of the
battery (see corresponding operation).
B1BP3G7D
B3FP7H3D
Angl-C6-PAGE170-194-2005 4/02/05 17:35 Page 191
