Remote Configuration
disk space of recorders.
Zoom Proportional Jog
When Zoom Proportional Jog is ON, pan/tilt speed is
adjusted automatically according to current zoom
level.
Auto Flip
ON: When tilt angle arrives at the top of tilt orbit(90°),
zoom module camera turns on its axis by 180° at the
top of tilt orbit and moves to opposite tilt direction
(180°) to keep tracing targets.
Off: Tilting more than 90° is not allowed.
Max Jog Speed
Set maximum speed of pan and tilt operation (8 steps).
Max Zoom Speed
Set maximum speed of zoom operation (8 steps).
Display PTZ Action
PTZ control action such as Preset Goto, Pattern, Swing
or Group can be displayed on the top of live display.
As the information is displayed with burn-in OSD, it is
inserted into encoded stream and all clients see the
information.
Auto: The information is displayed only for several
seconds after a specific operation.
ON: The information is displayed always.
OFF: The information is never displayed.
Description of action is displayed while configuring
the Pattern.
Power Up Action
Specify if the camera will continue previous action
such as pattern, swing or group after it is rebooted by
power.
ON: If pattern, swing or group was running before
rebooting, the action is resumed. If it was in stopped
state, it moves to the last position.
Off: Moves to the initial position after rebooting.
Scheduling Configurations
In order to allow different configurations of the
camera according to time of a day, the feature of
defining camera configurations and scheduling them
is provided..
Configuration Set
Select
4 different configuration sets can be configured by
opening the page with Config Set#N buttons. For
example, Config Set#1 can be configured for day
mode, and Config Set#2 can be configured for night
mode.
Scheduling of the configurations
Cells in the weekly/hourly schedule table can be set to
appropriate configurations by clicking a specific cell or
a cell for hour or a cell for a day of a week.
