Remote Configuration
Select ON to enable to use Dual Encoding
The secondary video can be viewed on Live View
window by selecting Secondary on Video selection
Dual Compression Algorithm
Select H.264 or MJPEG for the secondary streaming.
Maximum resolution is 720x480 and 3 steps of
resolution are available. If MJPEG is selected, only
“Quality” mode is supported
Motion Detection
Motion Detection on PTZ
Allow disabling of motion detection when PTZ
operation is performed. When it is set to Disable,
motion detection is disable while the scene is changed
due to PTZ control.
Motion Detection Area Editing
Configure regions for motion detection. Regions of
arbitrary shape can be configured by the following
steps.
Select Enable on Edit tab
Select editing Mode. Set is for including cells to
motion detection region and Erase is for excluding.
Select cells using the right button of the mouse.
Multiple cells can be selected conveniently by press
and dragging.
Press Apply Edited Area to save the editing
Sensitivity
Sensitivity is the condition to trigger an event of
motion detection.
The value determines the sensitivity of the motion
detection within a block: the larger, the more sensitive.
It is selectable from 0 to 100.
Information Display
System ID and/or server time can be display over the
video window in Internet Explorer. Each item can be
turn on or off separately, and position also can be
configure. This information is displayed after the
video is decompressed. At the top or bottom of
your message can be displayed.
Output Format
Output Format menu appears only when Enable
Preview is on.
Select the output format for the monitor preview
according to the video output and monitor
specification.
