13
2. Connect the data bus cable to the board making the red part of the cable contact the groove on the
connector.
3. Separate the screw from the HDD guide to install the HDD. If the system is hipping without HDD, refer to
the “One HDD installation” (In case of adding the HDD, refer to the “Two-HDDs installation”).
One HDD installation
For initial HDD installation, place HDD on
A position and
connect the HDD cable as shown left.
Two-HDDs installation
Place existing HDD on
A (Master setting) position, and
place second HDD on
B (Slave setting) position.
Use middle connector of HDD cable to second HDD as
shown left.
• Power cable connection : Use available cable nearest
from the HDD.
A
B
A
