1 PTZ1 / PTZ2 Button
Press to select a camera connected to the con-
troller’s data ports.
Press PTZ1 to control the camera connected to
RS-485 1CH port.
Press PTZ2 to control the camera connected to
RS-485 2CH port.
2 Zone Buttons
For details, see page 19.
3 Back Buttons
This button is used to return to the previous menu
or mode.
4 NUM Button
Press this button to change to numeric entering
mode on the menu.
5 Display Window
Displays function menus, numeric input, and
system status.
6 Numeric (0-9) and Arrow (left/right/up/down)
Buttons
Selects an option in the menu.
These buttons are used for numeric input of pre-
set numbers or for executing each parameter on
the Controller’s menu.
7 Set Up Button
Opens controller’s main Set Up menu in the dis-
play window.
8 OSD Button
Opens or closes the Camera’s Setup menu on
the screen.
9 Joystick Controller
This joystick manually operates the Pan/Tilt Head
and turning the joystick head to the right or left
will zoom or widen the image. (The zooming level
will go up or down.)
q; Preset Buttons
For details, see pages 12-14.
qa A-Pan (Auto-Pan) Buttons
For details, see page 17.
qs Func.1
Press the button to switch the LG Multix protocol
or LG Old protocol.
Func.6
If you use LG Multix Protocol, press the button to
change the AF Mode. (Auto or Manual) When the
AF Mode is PushAuto mode, press and hold the
button to activate the Auto Focusing and release
the button to inactivate the Auto Focus.
Func.2-5
These buttons are not assigned.
qd PTRN (Pattern) Buttons
For details, see page 18.
qf Alarm Buttons
For details, see pages 16.
qg Stop Button
Stops the playback of recorded images or pattern
playing back.
qh CLR (CLEAR) Button
Clears the parameter entered with numeric but-
tons.
qj SEL Button
This button is used to execute the currently
highlighted setting in the Setup menu.
qk Open/Close Buttons
The lens iris is adjusted by pressing the OPEN or
CLOSE button.
ql Near/Far Buttons
These buttons are used to adjust the lens focus
of cameras equipped with the specified lens.
w; In/Out Buttons
These buttons are used to zoom the camera
image In (TELE) and Out (WIDE).
wa RS-485 Data Ports (CH 2)
These ports are used to exchange control data
with the connected camera via the RS-485 cable.
To control the camera connected to this port,
press PTZ2 button on the controller.
ws RS-485 Data Ports (CH 1)
These ports are used to exchange control data
with the connected camera via the RS-485 cable.
To control the camera connected to this port,
press PTZ1 button on the controller.
wd RS-232C Port
Is used only for authorized service purposes.
wf DC 12V Input Jack (12V DC)
Connect a DC 12V Certified/Listed, class 2 power
supply only to the DC input terminal on the back
of the controller.
7
