21
Remote PTZ Reset
You can reset the connected PTZ camera’s parame-
ters to the factory default settings.
Auto Key Lock Setting
The keys on the controller is locked when there is no
operation for selected duration on the [Auto Key
Lock] option. To release the Key Lock mode, you
need to enter the password.
NONE: Auto Key Lock function is disable.
After 1 min.: The keys on the controller is locked
when there is no operation for 1 minutes.
After 3 min.: The keys on the controller is locked
when there is no operation for 3 minutes.
To Change the User Password
The factory default of password is “000000”.
However, for security, you should change the pass-
word setting.
1. Select [Change Password] option then press SEL.
The sub menu will appears.
2. Enter current 6-digit password using the number
buttons then press SEL.
3. Enter new 6-digit password using the number but-
tons then press SEL. Enter the password again to
confirm, and press SEL. The password is stored.
Note: We recommend that you do not operate the
controller during saving the password.
Factory Reset
You can reset the controller’s parameters to the fac-
tory default settings. You need to enter the password.
About LCC-K1000
Shows model name and the current firmware version
of the controller.
