6
English
9
17
18
15
16
13121110
14
3 4 5 6 7 82
1
Setting menu
(ScreenManager
®
*
1
)
Power connector
TroubleshootingSetting/AdjustmentInstallationPrior to use
Controls and Functions
1 Remote control Use to set and adjust the monitor. (For the details, please read “Remote
Control Guide”.)
2 Remote control detector Receives the signal from the remote control.
3 Sensor Detects the environmental brightness. BrightRegulator function (see page
14).
4 Input Signal Selection Switch
( )
*
2
• Switches the signal input displayed on the monitor.
• When touching the switch for approx. 2 seconds, a video display appears in
the PC display. When touching the switch again for approx. 2 seconds, the
video display disappears and only PC display remains (single display).
PinP display function (Refer to “Remote Control Guide”).
5 Slide bar
*
2
• Uses when the setting/adjustment is performed on each menu.
• When touching it while the menu is not displayed, the shortcut menu is
displayed. By touching the slide bar for 5 seconds, the content of the menu
changes (see page 7).
6 Menu switch ( )
*
2
Displays/Quits the Setting menu.
7 Power switch ( ) Turns the power on or off.
8 Power indicator Indicates monitor’s operation status.
Blue : The screen is displayed Orange : Power saving
Off : Power off
9 Security lock slot Complies with Kensington’s MicroSaver security system.
10 Audio output terminal [Stereo mini jack] Connects the built-in amplier speakers, etc.
11 Input signal connectors
(HDMI 1/2)
[HDMI connector
× 2] Connects AV equipment.
12 Input signal connector (PC 1) [DVI-D connector] Connects a PC.
13 Input signal connector (PC 2) [D-Sub mini 15-pin connector] Connects a PC.
14 USB ports (Up) [Upstream × 2] Connects a PC.
15 Headphone jack [Stereo mini jack] Connects headphones.
16 USB ports (Down) [Downstream × 2] Connects a peripheral USB device.
17 ArcSwing 2 Stand Used to adjust the height and angle of the monitor screen.
18 Cable holder Covers the monitor cables.
*
1
ScreenManager
®
is an EIZO’s nickname of the Setting menu.
For how to use ScreenManager, refer to the User’s Manual on the CD-ROM.
(In this manual, the setting/adjustment item names in the Setting menu are put in angle brackets < >. (ex. : <Color>))
*
2
When touching while the power turns off, the monitor turns on.
Cabling
