Page 4 Issue 1
CAUTIONS
(1) All brake connections must be kept
spotlessly clean and contamination with oil,
water and petrol should be avoided.
(2) When drilling fibreglass use tape on
the surface over the drill holes to prevent
damage to the gel coat or painted finish.
Slow drill speeds must be used.
(3) Do not over-tighten thermostatic fan
switch.
(4) If less than 43 mm is measured then
the differential casing may be holed. If more
than 43 mm is measured it is possible that
the De Dion tube may hit the differential.
