should have an RS-232 port to receive data from the
To install an RS-232 interface scanner, the host device
Installing an RS-232 Interface Scanner
3)
2) Connect the cable to the USB port of the device
for the USB port of the host device
should have a USB port to receive data from the
To install a USB interface scanner, the host device
4) Connect the cable to the system and
1) Make sure that the scanner has the correct
Installing a USB Interface Scanner
2
Getting Started
Installing Keyboard Wedge Scanner
To install a keyboard wedge scanner, follow the steps
listed below:
cable for the system (a PC or terminal)
2) Turn off the power of the system
3) Unplug the keyboard from the system
keyboard
5) Turn on the power of the system
6) If the indicator LED lights up and the buzzer
sounds, the scanner is ready for reading
scanner, follow the steps listed below:
1) Make sure that the scanner has the right connector
for the RS-232 port of the host device
2) Make sure that there is a power supply to the
scanner (if necessary)
3) Connect the cable to the RS-232 port of the device
4) If the indicator LED lights up and the buzzer
sounds, the scanner is ready for reading
scanner, follow the steps listed below:
1) Make sure that the scanner has the right connector
If the indicator LED lights up and the buzzer
sounds, the scanner is ready for reading
