AXIS M1014 Network Camera
Hardware Overview
Hardware Overview
4
5
6
7
9
8
12
11
10
2
1
3
1
Status LED indicator
2
Focus ring
3
Lens
4
Network connector (RJ-45)
5
Power connector
6
Lock ring
7
Control button
8
SD card slot (microSDHC)
9
Power LED indicator
10
Network LED indicator
11
LED indicator (not used)
12
Part number (P/N) & Serial number (S/N)
The Axis product is equipped with a lens with manual focus. It is delivered with the lens prefocused and manual focusing is
usually not required.
Note
Only change the focus if required, for example if the image is blurry.
Connectors
For technical specifications, see
page 46
.
Network connector - RJ-45 Ethernet connector.
NOTICE
Due to local regulations or the environmental and electrical conditions in which the product is to be use d, a shielde d
network cable (STP) may be appropriate or req u ired. Any network cables that are routed in outdoor environments or similar
sha
ll be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. See
Electromagnetic Compatibility (EMC )
for regulatory requirements.
4
