NOTE: if the drying results are not satisfactory it is possible to
activate only the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only
be possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid
dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, also the
rinse aid indicator light on the control panel is
automatically activated.
1. Press the On/Off button. The indicator lights of the
programme selection buttons will illuminate and in the digital
display are visible 2 horizontal lines (--) (setting mode).
If other button indicator lights are on and in the digital
display is visible the number of a programme (1 - 2 - 3 etc..),
this means that a washing programme has been set.
The programme must be cancelled: press the button
Cancel for about 3 seconds.
The indicator lights of the programme selection buttons will
illuminate and in the digital display will appear 2 horizontal
lines, this means that the set washing programme has
been cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press the function button 2, the indicator lights of function
buttons 1 and 3 turn off while the indicator light of the button
2 goes on flashing, the digital display indicates the current
setting.
4. To change the setting, press again the function button 2, the
digital display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. The indicator lights of the
programme selection buttons will illuminate and in the digital
display are visible 2 horizontal lines (--) (setting mode).
If other button indicator lights are on and in the digital
display is visible the number of a programme (1 - 2 - 3 etc..),
this means that a washing programme has been set.
The programme must be cancelled: press the button
Cancel for about 3 seconds.
The indicator lights of the programme selection buttons will
illuminate and in the digital display will appear 2 horizontal
lines, this means that the set washing programme has
been cancelled and the machine is now in setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press the function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the button
3 goes on flashing, the digital display indicates the current
setting.
4. To change the current setting, press again the function
button 3, the digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
27
Audible signals deactivated
Audible signals activated (factory set)
Rinse aid dispenser deactivated
Rinse aid dispenser activated
