- General information -
15
Position
Do not set up the telephone in the immediate vicinity of other
electrical equipment such as microwaves or hi-fi systems, as
this may result in mutual interference. The location has a
decisive influence on the trouble-free operation of the
telephone.
Place the telephone on a flat and non-slip surface. The feet of
the telephone do not normally leave any marks on the surface.
However, due to the large number of varnishes and surfaces in
use, it may not be possible to prevent marks occurring on the
surface due to the feet of the unit.
Do not use the telephone in areas where there is a risk of
explosion.
Excessive exposure to smoke, dust, vibrations, chemicals,
moisture, heat or the direct rays of the sun must be avoided.
Cleaning and care
The surface of the case can be cleaned with a soft, dry, lint-
free cloth. Never use cleaning agents, particularly aggressive
solvents. No attention is necessary apart from cleaning the
case occasionally. The rubber feet of the base station are not
resistant to all cleaning agents. The manufacturer can
therefore not accept any liability for possible damage to
furniture or the like.
CE mark
The telephone complies with the basic requirements of the
R&TTE Directive This is confirmed by the CE mark.
