/
* Cleaning Your Refrigerator
• Turn the temperature control to “MIN", unplug the refrigerator, and remove the food, shelves, and trays.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
• Wash the shelves and trays with a mild detergent solution.
• The outside of the refrigerator should be cleaned with mild detergent and warm water.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical
parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
• The condenser coils should be vacuumed when they are dusty or dirty.
I
----------------------------
-------------
-----------------------------------------------------
---
-------------------
1
WARNING: There are two holes (FF8Y) and five holes (FF12Y) near the temperature control knob.
The purpose of these holes is to let cold air flow from the freezer to the refrigerator
section. Inside these holes there is an inner piece of styrofoam material that enables the
temperature control box to operate properly. Please do not remove them under any
circumstances.
Lh mmm mm mm mm mm mm mm ^m ^m mm ^m ^m ^m ^m ^m mm <mm mm ^m ^m ^m mm mm «J
* CHANGING THE LIGHT BULB
Before removing the light bulb, either unplug the refrigerator br disconnect the electricity leading into
the refrigerator at the main power supply. Failure to do so could result in electrical shock or personal
injury.
Remove the light bulb cover by pushing up the bottom end of the plastic cover gently.
Unscrew the bulb.
Replace with a 15 watt-refrigerator bulb that is the same shape and size.
Replace the light bulb cover.
