49
Hose, 1/4” x 60” with fittings
T-Handle W/O Wheel for Transport Base
T-Handle W/ Wheel for Portability
Wheel For Portability T-Handle, Ø5" x 1-1/2"W
Wheel For Portability, Ø5" x 2-1/2"W
Pin For Portablilty Wheel, Ø1-1/4 x 4"L W/ Tab
3/4HP & 1-1/2HP Internal & Remote Power Units
Motor, 3/4 HP, 115-230V, 60Hz, 1 PH, 1800 RPM, Tang Shaft
Motor, 1-1/2 HP, 208-460V, 60Hz, 3 PH, 3600 RPM, Tang Shaft
Pump, 1.4 GPM@3450 RPM W/ Down Valve
Pump, 0.9 GPM@3000 RPM (For Deltatrol Block)
Tongue & Groove Coupling (Between MTR & Pump)
Reservoir, Plastic, 3-3/4" x 5-1/2" x 15-1/4" (Remote Only)
Suction Strainer For Plastic Reservior
41001220
Deltatrol II Valve Block, Includes Down Valve & 1-1/2 GPM Flow
Control
Gasket For Deltatrol Block, 4" x 6" x 1/8" Thick, Small Holes
Suction Strainer For Deltatrol, 90°
Remote 5hp Intermittent Duty Power Unit
Motor, 5 HP, 208-460V, 60Hz, 3 PH, 3600 RPM, Tang Shaft
Pump, 1.4 GPM@1800 RPM, Without Solenoid Coil
Reservoir, Plastic, 9" x 9" x 18"
Hydraulic Flow Control Valve, 3 GPM, 3/8 FNPT
Remote 5hp Heavy Duty Power Unit
Motor, 5 HP, 208-460V, 60Hz, 3 PH, 3600 RPM
Mounting Bracket, Motor/Pump
Gasket, 8-5/8"OD x 6-1/4" ID x 1/16" Thick, With (4) Holes
Reservoir, Steel, 16" x 16" x 10"
Rivet for Filler/Breather Cap
Jaw Coupling, 1-1/8" Bore
41001210
Deltatrol II Valve Block, Includes Down Valve & 4-1/2 GPM Flow
Control
Gasket for Deltatrol Block, 4" x 6" x 1/8" Thick, Large Hole
Hose, 3/8 x 14", 1/4 MNPTS X 3/8 MNPTS
Suction Strainer, 3/4 FNPT
