Model Travel Capacity
(pounds)
Lowered
Height
Load
End
(pounds)
Load
Side
(pounds)
Standard
Plat. Size
Maximum
Plat. Size
5ABS20 5” 2,000 6 ½” 2,000 2,000 24” x 48” 48” x 96”
5ABS 40 5” 4,000 6 ½” 4,000 4,000 24” x 48” 48” x 84”
5ABS60 5” 6,000 6 ½” 4,000 4,000 24” x 48” 48” x 72”
7ABS20 7” 2,000 6 ½” 2,000 2,000 24” x 48” 48” x 96”
7ABS45 7” 4,500 6 ½” 4,000 4,000 24” x 48” 48” x 84”
7ABS60 7” 6,000 7 ½” 4,000 4,000 24” x 48” 48” x 72”
10ABS20 10” 2,000 7 ½” 2,000 2,000 24” x 48” 48” x 96”
10ABS40 10” 4,000 7 ½” 4,000 4,000 24” x 48” 48” x 84”
10ABS45 10” 4,000 12 ½” 4,000 4,000 24” x 48” 48” x 84”
11ABS40 11” 4,000 7 ½” 3,000 3,000 24” x 48” 48” x 72”
12ABS20 12” 2,000 12 ½” 2,000 2,000 24” x 48” 48” x 96”
12ABS30 12” 3,000 12 ½” 3,000 3,000 24” x 48” 48” x 84”
12ABS45 12” 4,500 12 ½” 4,000 4,000 24” x 48” 48” x 84”
15ABS20 15” 2,000 12 ½” 2,000 2,000 24” x 48” 48” x 96”
15ABS30 15” 3,000 12 ½” 3,000 3,000 24” x 48” 48” x 84”
SPECIFICATIONS
LOADING
The scissors lifts have the load capacity rating stamped on a metal plate attached on
one side of the lift. This figure is a net capacity rating for a lift furnished with the
standard platform. In the event that gravity-roll sections, special tops, etc., are installed
on the lift after leaving the plant, deduct the weight of these from the load rating to
obtain the net capacity. Damage may result if the lifts are overloaded beyond the
established capacity
UNBALANCED LOADING
The stabilization provided is basically for balanced loads. Due to the fact that the lift is
designed to operate without having to be lagged to the floor, special attachments that
extend beyond the length and/or width dimensions of the platform should be avoided.
This will prevent unintentional tipping of the lift that could lead to damage of the
equipment or personal injury.
10
