B) Always make sure the battery cables are secured directly against the terminal, clean, tight and
routed correctly.
C) All non-original electrical accessories wired on the vehicle are connected to a second, separate
mount on the battery, (see image below). Temporarily removing or bypassing any non O.E
accessory device may be a valid test when troubleshooting for odd problems.
4. Road Test
After you have performed all of these tasks you can road test to confirm you have remedied the
problem, in addition read the Diagnostic Trouble Codes again within the ThunderMax® software to
verify that there are no other problems pending on the motorcycle. If you have a question from this
point send in a module data collection which will read everything stored within your module, sending it
directly to the TMax product support desk
