INDICATOR DESCRIPTION REMEDY
CHECK light
Slow beep
Once every 2 sec
Door Not Closed Close Door
CHECK light
Very Slow beep
Once every 10 sec
Back Up Operating
Mode
Thermister damaged
Replace thermister
when convenient
Temp Set LEDs all
flash when MODE
switch is pressed
Back Up Operating
Mode
Thermister damaged
Replace thermister
when convenient
Burner failed to light Retry
CHECK light
GAS light flashing
Gas unavailable Connect gas
CHECK light
AC light flashing
AC unavailable Connect AC
CHECK light,
AUTO light, AC light
All on
1. Open DC fuse
2. Open thermal switch
3. Prolonged operation
in severe tilt position
1. Replace fuse
2. Contact service
3. Contact service
TROUBLESHOOTING
REFRIGERATOR IS NOT COOLING PROPERLY
1. Burner orifice clogged
Cleaning procedure pg. 7
2. Check level of refrigerator
3. Venting problem
Remove obstruction in air flow behind
cabinet
4. Heavy frost buildup on cabinet fins
Defrost procedure pg. 7
5. Flue baffle not inserted properly in flue tube
6. Burner dirty
Clean burner
7. LP gas pressure low at burner
Set main vehicle regulator to deliver 11” wc.
8. Burner not located properly under flue tube.
Flame should be centered underneath the
flue tube and the flame should not “wick
up” next to any of the flue sides.
Relocate burner under flue tube by an
authorized Atwood service technician
9. Burner damaged
Replace burner by an authorized Atwood
service technician
10. Odor from fumes
o Dislocated burner
o Damaged burner
o Dirty flue
11. Fuses
o Refrigerator AC supply
o Refrigerator Control – Powerboard
ERROR MESSAGES
The refrigerator shelves are equipped with safety shelf clips
which are intended to prevent children from removing the
shelves and creating a possible safety hazard.
The shelves can be rearranged by removing the clips,
repositioning the shelves as desired and reinstalling the clips.
The shelves should never be positioned to allow a space
greater than 2 cu ft (or 60 liters) between any two shelves.
