A
A
C
C
B
B
• Remove the covers (A). Remove the
cover plugs (C).
• Unscrew the handles (B)and fix them on
the opposite side. Place the upper han-
dle to the lower door and the lower
handle to the upper door
• Re-insert the cover plugs (C) on the op-
posite side.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabi-
net.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the nat-
ural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The Af-
ter Sales Service specialist will carry out
the reversibility of the doors at your cost.
WARNING!
In case you do not want to carry
out the above mentioned opera-
tions, contact the nearest After
Sales Service Force. The After
Sales Service specialist will carry
out the reversibility of the doors at
your cost.
WARNING!
After having reversed the opening
direction of the doors check that
all the screws are properly tight-
ened and that the magnetic seal
adheres to the cabinet.
If the ambient temperature is cold
(i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that
case, wait for the natural fitting of
the gasket. Lay down the appli-
ance back side down.
9. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
ENGLISH 25
