Midwest Industries, Inc. Ida Grove, IA 51445 800-859-3028 www.shorelandr.com 0004292
Page 5 of 14 11/04/2010
WINCH POST ASSEMBLY
Locate the winch post and position it on the tongue. Place the
1/2” x 3 9/16” x 6” U-bolts up around the tongue, align the legs
of the U-bolts with the holes in the winch post base and insert.
Secure the U-bolts in place using ½” flange lock nuts. Tighten
only enough to secure in place because they will have to be
moved again for final adjustment when the boat is placed on
the trailer.
Locate the winch handle. Press the retainer clip on the end of
the winch handle so it can be slipped onto the drive shaft.
Release clip once the handle is fully on the drive shaft. Note
that the winch handle should be removed during transport to
eliminate the possibility of loosing it.
