Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com 0003561
Page 5
Diagram C
WINCH POST
Locate the winch post and position it on the tongue. Place the ½”
x 3 9/16” x 6” U-bolts up around the tongue, align the legs of the
U-bolts with the holes in the winch post base and insert. Secure the
U-bolts in place using ½” flange lock nuts. Tighten only enough to
secure in place because they will have to be moved again for final
adjustment when the boat is placed on the trailer.
Locate the winch handle. Press the retainer clip on the end of the
winch handle so it can be slipped onto the drive shaft. Release
clip once the handle is fully on the drive shaft. Note that the winch
handle should be removed during transport to eliminate the pos-
sibility of loosing it.
