-1
Introduction
Before using the projector, please read this operation manual carefully.
1. WARRANTY
2. CONSUMER PRODUCT SAFETY ACT
WARNING:
WARNING:
WARNING:
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Introduction
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS
EXCEPT SPECIFIED USER
SERVICE SCREW.
INFORMATION
WARNING:
Downloaded From projector-manual.com Sharp Manuals
-7
Introduction
1. Read Instructions
2. Retain Instructions
3. Heed Warnings
4. Follow Instructions
5. Cleaning
6. Attachments
7. Water and Moisture
8. Accessories
9. Transportation
10. Ventilation
11. Power Sources
12. Grounding or Polarization
IMPORTANT SAFEGUARDS
13. Power-Cord Protection
14. Lightning
15. Overloading
16. Object and Liquid Entry
17. Servicing
18. Damage Requiring Service
19. Replacement Parts
20. Safety Check
21
.
Wall or Ceiling Mounting
22. Heat
CAUTION: Please read all of these instructions before you operate this product and save these
instructions for later use.
Downloaded From projector-manual.com Sharp Manuals
-9
Introduction
Caution regarding usage of the projector
■ When using the projector, take care not to sub-
ject it to hard impact and/or vibration, as this
can result in damage. Take extra care with the
lens. If you are not to use the projector for a
long time, make certain you unplug the power
cord from the wall outlet, and disconnect any
other cables connected to it.
■ Do not carry the projector by holding the lens.
■
When storing the projector, ensure you attach
the lens cap to the projector. (See page 12.)
■ Do not expose the storage case or projector
to direct sunlight or near heat sources. The
storage case or projector may change color
or become deformed.
Other connected equipment
■ When connecting a computer or other audio-
visual equipment to the projector, make the
connections AFTER unplugging the power
cord of the projector from the AC outlet and
turning off the equipment to be connected.
■ Please read the operation manuals of the pro-
jector and the equipment to be connected for
instructions on how to make the connections.
Using the projector in other countries
■ The power supply voltage and the shape of
the plug may vary depending on the region
or country you are using the projector in.
When using the projector overseas, make
sure you use an appropriate power cord for
the country you are in.
Temperature monitor function
■
If the projector starts to over-
heat due to setup problems
or blockage of the air vents,
“ ” and “ ” will illumi-
nate in the lower left corner of the picture. If the
temperature continues to rise, the lamp will turn
off, the temperature warning indicator on the
projector will blink, and after a 90-second cool-
ing-off period the projector will enter the standby
mode. Refer to “Maintenance Indicators” on
page 59 for details.
Info
• The cooling fan regulates the internal tem-
perature, and its performance is automati-
cally controlled. The sound of the fan may
change during projector operation due to
changes in the fan speed. This does not
indicate malfunction.
Downloaded From projector-manual.com Sharp Manuals
