Step 6
Parts Needed For
Corners
6515 Wall Panel (2)
9373 Front Wall Panel (2)
6514 Corner Panel (4)
NOTE
The remainder of the building assembly
requires many hours and more than one
person. Do not continue beyond this point
if you do not have enough time to com
plete the assembly today. A partially
assembled building can be severely
damaged by light winds.
Each screw and bolt in the wall re
quires a washer.
1 Position a corner panel at the
corner of the floor frame as shown.
The widest part of each corner panel
must be placed along the side of the
building for all four corners. Fasten
the corner panel to the floor frame
with four screw.
STEP
6514
SIDE
6514
Support the corner panel with a step
ladder until a wall panel is attached.
2 Attach the front wall panels to the
frontcornerpanels, as shown. Asmall
gap will exist between front wall panel
and ramp.
3 Attach the wall panels to the rear
corner panels, as shown.
NOTE
Be careful to install the correct
panel in each position as shown
6515
6515
4 Double-check the part numbers of
the wall panels, before proceeding.
The floor frame must be square
and level or holes will not align.
STEP
3
1"
STEP
2
9373
9373
ir-n 6515
Panels rest on
frame as shown
Crimped Rib
Underneath
Washer
19
