Arcam Brand's Products

CS-352

WARNING

Using improper replacement components or removing safety devices may result in serious or fatal injury.

WARNING

• During operation, the mufer or catalytic mufer and surrounding cover become hot.

• Never suspend the saw on a lanyard with the engine running.

• Always use the saw from the right-hand side of your body – NEVER from the left side.

• Always wear proper safety clothing to protect your lower body from sharp saw chain and hot mufer.

• Always keep exhaust area clear of ammable debris during transportation or when storing, otherwise

serious property damage or personal injury may result.

WARNING

Moving parts can amputate ngers or cause severe injuries. Keep hands, clothing and loose objects away from

all openings.

• ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop

before removing obstructions, clearing debris, or servicing unit.

• DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

• NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.

WARNING

Check fuel system for leaks due to fuel tank damage, especially if the unit is dropped. If damage or leaks are

found, do not use unit, otherwise serious personal injury or property damage may occur. Have unit repaired by an

authorized servicing dealer before using.

12. Use extreme caution when cutting small size brush

and saplings because slender material may catch the

saw chain and be whipped toward you or pull you off

balance.

13. When cutting a limb that is under tension, be alert for

spring-back so that you will not be struck when the

tension in the wood bers is released.

14. Keep the handles dry, clean, and free of oil or fuel

mixture.

15. Operate the chain saw only in well ventilated areas.

16. Do not operate a chain saw in a tree unless you have

been specically trained to do so.

17. All chain saw service, other than items listed in the

Instruction manual maintenance instructions, should

be performed by competent service personnel.

(For example, if improper tools are used to remove

the ywheel or if an improper tool is used to hold

the ywheel in order to remove the clutch, structural

damage to the ywheel could occur and could

subsequently cause the ywheel to burst.)

18. When transporting your chain saw, use the

appropriate guide bar scabbard.

19. Spark arrestor mufers approved to SAE Standard

J335 are standard on ECHO chain saws to reduce

the possibility of forest res. Do not operate the chain

saw with a loose or defective mufer. Do not remove

the spark arrestor screen.