KODAK PROFESSIONAL EKTACHROME Film E200 • E-28 3
Adjustments for Long and Short Exposures
No filter correction or exposure compensation is required for
exposures from 1/10,000 to 10 seconds.
Note: This information applies only when exposing the film
to daylight. The data are based on average emulsions
rounded to the nearest 1/3 stop and assume normal,
recommended processing. Use the data only as a guide. For
critical applications, make tests under your conditions.
PROCESSING
Process E200 Film in KODAK Chemicals, Process E-6.
For consistent processing of this and all other
EKTACHROME Films, use a lab that is a member of the
KODAK Q-LAB Process Monitoring Service.
Push Processing Characteristics
You can increase the effective speed (i.e., push) of E200 Film
by adjusting the time of the first developer. Increased film
speed is useful under dim lighting conditions, or when you
need high shutter speeds to stop action or small lens
openings for increased depth of field. Pushing E200 Film
will also compensate for underexposure.
Exposing KODAK PROFESSIONAL
EKTACHROME Film E200 for Push Processing
Labs that provide push processing with Process E-6 usually
offer the service for fixed time increases such as push 1,
push 2, or push 3 in the first developer (see the following
table). It is a good idea to make a series of test exposures and
then work with your lab to determine optimum exposure
settings for push processing.
The following exposure indexes are good starting points
for daylight exposures when you intend to have E200 film
push processed.
Starting-Point Exposures for Push Processing
EKTACHROME Film E200
Exposure Index
Specify This Push
Condition to the
Lab
Typical Time in
First Developer
320 Push 1 8 minutes
640 Push 2 11 minutes
800 Push 3 13 minutes
RETOUCHING TRANSPARENCIES
Use KODAK E-6 Transparency Retouching Dyes. You can
chemically retouch the 120 format of this film on both the
base and the emulsion side. Retouch only the emulsion side
on the 135 size.
For information on retouching equipment, supplies, and
techniques, see KODAK Publication No. E-68, Retouching
Transparencies on KODAK EKTACHROME Film.
PRINTING TRANSPARENCIES
You can reproduce images made of E200 Film by using a
variety of Kodak materials.
Duplicate Color Transparencies
For direct printing, use—
KODAK PROFESSIONAL EKTACHROME
Duplicating Film EDUPE
Color Prints
You can scan your image to a file and print digitally to—
KODAK PROFESSIONAL PORTRA, SUPRA, and
ULTRA ENDURA Papers
KODAK PROFESSIONAL ENDURA Transparency
Display Material
KODAK PROFESSIONAL ENDURA Clear Display
Material
KODAK PROFESSIONAL ENDURA Metallic Paper
