Methods for Customizing Your Phone
15 41-001385-00 Rev 01 – 06.2013
Simplified Options Menu
Your System Administrator may configure a simplified options menu for your phone. The following table indicates the
options that may appear on your phone if the simplified options menu is applied.
Using the IP Phone UI
References
For more information about customizing your phone using the available options from the IP Phone UI, see the section
“Customizing Your Phone” on page 24. For more information about administrator options, contact your System Adminis-
trator.
Note:
*The "Administrator Menu" options are Administrator level functions only, and are not accessible by the user. These
options should only be set up and changed by your System Administrator.
Option Number Option
1Call Forward
1. All
2. Busy
3. No Answer
The menus that display for Call Forward are dependant on the Call Forward
Mode set on the phone. Default is "Account" mode.
2 Preferences
1. Tones
Ring Tone
Tone Set
2. Display
Contrast Level
Backlight
3. Set Audio
Audio Mode
Headset Mic Vol
DHSG
3 Phone Status
1. IP&MAC Addresses
2. LAN Port
3. PC Port
4. Firmware Info
5. Error Messages
6. Restart Phone
7. Factory Default
8. Erase Local Cfg.
9. Copyright
4 Phone Lock
IP Phone UI
1. Press the Options key on the phone to enter the Options List.
2. To go to an Option, use 5 and 2 to scroll through the list, or press the number corresponding to the Option.
3. Press the Show softkey, the 4 key, or press the digit number of the corresponding option to select an option.
4. Use the softkeys that display for each option to change a selected option.
5. Press the Done key to save the change.
6. Press the key, the 3 key, or the key at any time to exit without saving changes.
