DMR100 User’s Guide V2.0
54
to download the latest firmware version. The downloaded file must be placed on the same network
as the PC that will be used to connect to the DMR100.
2. Go to the Update section of the main menu and click on the browse button to search for the
downloaded *.mpup file. Locate the file and make the path to the file is shown in the window for
the file path.
3. You can select the Cancel button if you do not wish to modify your current software version.
4. Select the Upgrade button to begin the upgrade. Be sure to wait until the upgrade is complete
before proceeding.
5. If your DMR100 doesn’t automatically reboot, manually do this by selecting the Reboot button in
the Info section. This will reboot the unit and the new software will be in place.
Reset Configuration
Selecting the Reset Configuration button will reset all settings in the DMR100 back to the factory
settings. This will not delete any of your recorded files, only the system configuration settings. You can
find a list of the factory settings in Appendix B in this user guide. This is the same as using the reset
button within the hold on the front on the DMR100.
Delete All Content
Selecting the Delete All Content button in the Update section of the DMR100 will erase ALL recorded
material from the hard drive. In addition to removing all material, the recording “number” is reset back to
zero (0).
Make sure you want to delete all recordings on the hard drive because this selection is not
recoverable. You can not “undo” this selection once the files have been erased!
