DMR100 User’s Guide V2.0
45
Author Login Security
By default, the author login is disabled. Checking the Enable author
checkbox will enable security for
the user. This will require all users to have an ID of “user” and the password created in the “user
password” field.
Enter an author password in the “user password” field and confirm it by clicking Save author Security
Settings button. The next time the DMR100 is accessed, anyone logging in will be presented with a
login box asking for the ID (“user”) and a password.
Un-checking the Enable author checkbox will deactivate the “author” login.
Changing the Administrator Password
Administrator rights are required to access or change any of the settings under the “Manage” section in
the main menu. These sections include: Config IP, Security, Update, and System Information. By default,
the Administrator ID and password are set to “admin” and “MediaPOINTE” respectively. It is not
possible to change the Administrator ID. It will always be “admin”. To change the Administrator
password, perform the following steps:
Enter a new password in the “New admin Password” field and confirm it in the “Confirm New admin
Password” field. Click on the “Change admin Password” button and the password will be changed.
The next time the DMR100 is accessed, the new admin password will take effect.
Be sure to write down the new administrator password and keep it in a safe place. If you forget the
admin password, the DMR100 will have to be reset back to the factory defaults to enable an
administrator to access the Manage section of the unit.
