P/N 140121 Rev B Page 2/6
Installation
1. Determine a suitable location for the
printer with the following
requirements:
Flat stable surface with sufficient
clearance to allow for interface
cables and media loading.
Free from excessive direct
sunlight, temperature, humidity,
dust, dirt, and debris.
Near a grounded AC power
receptacle wired in compliance
with local ordinances.
2. Ensure printer Power Switch is
off "0".
3. Connect the power cord to the AC
Inlet Receptacle located on the
back of the printer.
4. Connect AC power plug to a suitable
AC source.
5. Connect a suitable interface cable
(i.e. Parallel, Serial, USB or
Ethernet).
NOTE: The default serial interface
parameters are: 9600, 8 data bits, 1
stop bit, XON/XOFF and RTS/CTS.
Front View
Back View
External Label
Feed Slot
Cover
