5. Remove ground wire (green with yellow
stripes) from external ground connector
screw. Fasten under center, silver-colored
terminal block screw.
6. Connect ground (green) wire of cord to
external ground conductor screw.
7. Connect ground (white) wire of cord under
center screw of terminal block.
8. Connect the other wires to outer screws.
9. Tighten the strain relief screws.
10. Replace terminal box cover on back of
dryer.
11. Plug dryer into wall receptacle.
12. Turn power on at breaker/fuse box.
Customer Care Center28
1-800-898-1879
www.askousa.com
Installation instructions
