Setting the time for the Timed Dry and Air
Fluff programs
You can set the time so that it appears on the
display as Start, End, or the number of min-
utes. This will depend on how you have cho-
sen to display times.
1. Press the program selector until the Time
setting is highlighted.
2. Turn the program selector to select the
time in 15 minute intervals.
3. Press the Start button to start the program
or press the program selector to choose
more options.
6
Press the Start button
Remaining drying time
An estimate of the remaining drying time
will be shown on the display within 2 minutes
of the drying program starting. For example,
1:35 means it will take approximately 1 hour
and 35 minutes for the load to dry. If the Anti
Wrinkle option has been selected, the drum
will rotate every minute for 2 hours after
cooling.
Stopping or changing a program
Press and hold the Stop button for three sec-
onds.
Note!
The program will not be affected if you change
the program selector after the program has
started.
Loading or removing laundry
If you want to load or remove laundry once
you have started the machine, open the door
and the program will stop. Load more laundry
or take out the items you want, close the door,
and press the Start button. A new estimate of
the remaining program time will be displayed
after about 2 minutes.
Customer Care Center14
1-800-898-1879
www.askousa.com
Operating instructions
