EN5
- If alcoholic beverages are used when cooking foods (e.g. rum, cognac,
wine), remember that alcohol evaporates at high temperatures. As a
result, there is a risk that vapours released by the alcohol may catch
re upon coming into contact with the electrical heating element.
- Overheated oils and fats catch re easily. Always remain vigilant
when cooking foods rich in fat, oil or alcohol (e.g. rum, cognac, wine).
- Never use steam cleaning equipment.
- Do not touch the oven during the pyrolysis cycle. Keep children away
from the oven during the pyrolysis cycle. Excess spillage must be
removed from the oven cavity before cleaning cycle (only for ovens
with Pyrolysis function).
- During and after the pyrolysis cycle, the animals have to be kept away from
the area of the appliance location (only for ovens with Pyrolysis function).
- Only use the temperature probe recommended for this oven.
- Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface, which may
result in shattering of the glass.
- Ensure that the appliance is switched o before replacing the lamp to
avoid the possibility of electric shock.
- Do not use aluminium foil to cover food in the cooking vessel (only
for ovens with cooking vessel supplied).
Scrapping of household appliances
- This appliance is manufactured with recyclable or reusable materials. Dispose of it in accordance with local waste disposal
regulations. Before scrapping, cut o the power supply cable.
- For further information on the treatment, recovery and recycling of household electrical appliances, contact your competent
local authority, the collection service for household waste or the store where you purchased the appliance.
INSTALLATION
After unpacking the oven, make sure that it has not been damaged during transport and that the oven door closes properly. In
the event of problems, contact the dealer or your nearest After-sales Service.
To prevent any damage, only remove the oven from its polystyrene foam base at the time of installation.
Children should not perform installation operations. Keep children away during installation of the appliance. Keep the packaging
materials (plastic bags, polystyrene parts, etc.) out of reach of children, during and after the installation of the appliance.
PREPARING THE HOUSING UNIT
• Kitchen units in contact with the oven must be heat resistant (min 90°C).
• Carry out all cabinet cutting work before tting the oven in the housing and carefully remove all wood chips and sawdust.
• After installation, the bottom of the oven must no longer be accessible.
• For correct appliance operation, do not obstruct the minimum gap between the worktop and the upper edge of the oven.
ELECTRICAL CONNECTION
Be sure the power voltage specied on the appliance dataplate is the same as the mains voltage. The dataplate is on the front
edge of the oven (visible when the door is open).
• Power cable replacement (type H05 RR-F 3 x 1.5 mm2) must be carried out by a qualied electrician. Contact an authorized
service centre.
