Dil ID: 1
Dil Adı: english
Dil Kodu: en2 ALLIANCE Brand's Products
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



77777
38934 7
Operating Instructions for
LWS21AW-3062 . . .
To Wash Clothes
IMPORTANT: Before using your new washer, make
sure washer cord is plugged into a 240 Volt electrical
outlet that has the proper grounding and polarity,
that washer hoses are connected to hot and cold water
faucets, and that faucets are turned on. Be sure the
drain hose is not kinked and is inserted into a drain.
See INSTALLATION INSTRUCTIONS for details of
proper washer installation. Keep these instructions
for future reference.
1. Get clothes ready for washing. Empty pockets and
cuffs. Sort items into separate loads. Pretreat stains
and heavily soiled areas.
2. Measure and add detergent to the washtub.
3. Add clothes loosely into the washtub. The bulk of the
clothes rather than the weight will determine load
size.
4. Close the loading door. The washer will not agitate or
spin with the loading door open.
5. Set WASH/RINSE temperatures.
NOTE: The washer will provide a cold rinse in all
TEMPERATURE settings. A warm rinse can cause
wrinkling in some garments. Cold rinses will save you
money and energy and will help reduce wrinkling in
permanent press and synthetics.
The Energy Saver settings, marked with a dot (), show
which temperature settings will use the least energy.
6. Set LOAD SIZE WATER LEVEL control. Use
RESET if agitation has started and more water is
needed.
NOTE: Refer to Page 9 for information on load sizes.
IMPORTANT: Holding the LOAD SIZE WATER
LEVEL control in the RESET position can cause
flooding of the washer.
7. Select cycle according to the type of fabric being
washed. Push the timer knob in and turn clockwise to
the desired cycle and wash time.
8. Pull the timer knob out to start the water fill.
Agitation will begin when the water reaches the level
you selected.
The washer will stop (pause) shortly before the wash
and rinse spins. Do not turn the timer through these
pauses. They are part of the cycle.
To reduce the risk of severe personal injury,
DO NOT by-pass the loading door switch by
permitting the washer to spin with the loading
door open.
W027
WARNING
(continued)