Status Meaning
On A Bluetooth headset is connected to
t
he base unit. Ready to use it.
Flashing – A Bluetooth headset is in use
–
The base unit is searching for the
paired Bluetooth headset.
– The base unit is pairing a headset.
– Mute is turned on.
Flashing
r
apidly
A landline call is being received.
Light off – The Bluetooth headset is not
c
onnected to the base unit.
– A Bluetooth headset is not paired
to the base unit.
LINE indicator on the base unit
The LINE indicators show the status of each line,
respectively, as follows.
Status Meaning
Light off The line is available.
Light on The line is in use.
Flashing
r
apidly
A call is being received.
Flashing A call is put on hold or the
a
nswering system is answering a
call.
Language setting
Display language
Y
ou can select either “English” or “Español”
as the display language. The default setting is
“English”.
Handset / Base unit
1 MM
ENUN#110
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Voice guidance language
P
rogram this setting using either the base unit or
one of the handsets.
Handset / Base unit
1 MM
ENUN#112
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Date and time
P
rogram this setting using either the base unit or
one of the handsets.
Handset / Base unit
1 MMENUN#101
2 Enter the current month, date, and year by
selecting 2 digits for each.
Example: July 15, 2013
07 15 13
3 MOKN
4 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
5 Proceed with the operation for your unit.
Handset: *: Select “AM” or “PM”.
Base unit: MAM/PMN: Select “AM” or “PM”.
6 MSAVEN
7 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
Spanish is selected, 24-hour clock format is
used.
Other settings
Dialing mode
I
f you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
16
For assistance, please visit http://shop.panasonic.com/support
Getting Started
