79
Chapter 15. Appendices
6
Appendices
Song REC Full!
❍ No more can be recorded in this song, since the
maximum number of patterns in one song has been
exceeded.
→ A maximum of 999 patterns can be registered as part of
one song. No further patterns can be registered.
■ Card related
WARNING! Turn OFF Power Data
Maybe Damaged!
❍ A card was inserted or removed while the power was
on, or the power was turned on when a card was
inserted halfway.
→ Turn off the power, remove the card or insert it correctly,
and then turn the power on once again.
Memory Full!
❍ Data cannot be saved, since there is insufficient space
remaining on the memory card.
→ Delete unneeded data. (p. 69)
❍ There is not enough memory to load the WAV/AIFF
file.
→ Delete unneeded samples. (p. 49)
→ Reduce the size of the WAV/AIFF file.
Protected!
❍ Sampling to a memory card bank is not possible
because a write-protect sticker is affixed to the memory
card.
→ Remove the write-protect sticker from the memory card.
❍ Data cannot be saved because a write-protect sticker is
affixed to the memory card.
→ Remove the write-protect sticker from the memory card.
Unsupported Format!
❍ The format of the inserted memory card is a format that
the SP-505 cannot use.
→ The SP-505 is able to use only 8–128 MB Smart Media
memory cards with a 3.3 V power supply. Please check
the type of card you are using.
❍ Loading/saving is not possible because the sample or
sequencer data is corrupted.
→ Either erase (p. 69) the offending data, or format the
memory card (p. 66).
❍ You are attempting to load a WAV/AIFF file that
cannot be loaded into the SP-505.
→ Read the cautionary notes regarding the loading of
WAV/AIFF files. (p. 70)
■ System related
Too Busy
❍ The data could not be processed fast enough.
→ Operate the buttons or VALUE dial more slowly.
Memory Damaged
❍ The contents of internal memory have been destroyed.
→ Perform the Initialize operation as directed by the
display.
If this does not resolve the problem, contact a nearby
Roland service center.
