13
AG8032 Spine and Leaf Switch
4.2 Fiber Optic Connections
Optional 40G QSFP transceivers can be used for ber connections from the switch to other
network devices in the data center. A QSFP+ transceiver may also be used for long distance
connections to devices at another site.
WARNING:
• When selecting a ber QSFP device, considering safety, please make sure
that it can function at a temperature that is not less than the recommended
maximum operational temperature of the product. You must also use an
approved Laser Class 1 QSFP transceiver.
The following gure illustrates the QSFP port ber connection.
(Figure 4-2: Making QSFP Port Fiber Connection)
4.2 Ethernet Cabling
To ensure proper operation when installing the switch into a network, make sure that the
current cables are suitable for 10BASE-T, 100BASE-TX or 1000BASE-T operation. Check the
following criteria against the current installation of your network:
• Cable type: Unshielded twisted pair (UTP) or shielded twisted pair (STP) cables with RJ-
45 connectors; Category 3 or better for 10BASE-T, Category 5 or better for 100BASE-TX,
and Category 5, 5e or 6 for 1000BASE-T.
• Protection from radio frequency interference emissions
• Electrical surge suppression
• Separation of electrical wires (switch related or other) and electromagnetic elds from
data based network wiring
• Safe connections with no damaged cables, connectors or shields
