- 14 -
CHAPTER 2 | Installing the Switch
Mounting
HORIZONTAL SURFACE MOUNTING
The switch includes four pre-installed rubber feet for horizontal surface mounting.
To mount devices on a horizontal surface, follow these steps:
1. Attach the four adhesive feet to the bottom of the first switch.
Figure 10: Attaching the Adhesive Feet
2. Set the device on a flat horizontal surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
3. If installing a single switch only, go to Connecting to a Power Source.
4. If installing multiple switches, attach four adhesive feet to each one, then place each
device squarely on top of the one below, in any order.
