14
Troubleshooting Tips
Problem
Solution
Cause
If “Please close a lid” is shown → Please close a lid.
If “Please start” is shown → Please put off the dedicated
container LepiCuve, oｒ start
to measure.
If “Resistance is too low” is shown
→
Please refer to the user’s
manual ” for setting “
If “Conductivity is too low” is shown
→
Please inject the liquid sample
again.
Lower electrical
conductivity because
of bubbles in a
sample liquid
If “Please put off LepiCuve” is shown
→
Please put off the container
If “Power save mode. Press a mode
button” is shown →
Please press a mode button.
“EEPROM Not initialized“ → Please call our customer
support
Out of order
If “ERROR” is shown→ Please take a number of the
error message, call our
customer support.
If ”Resistance ＯＫ” is shown
continuously, though the lid is
close-fitting enough,→
Please turn in a clockwise
direction with a dedicated
industrial tool (fine hexagon
wrench).
If ”Resistance ＯＫ”is not shown on a
display, though the lid is close-fitting
enough →
Please turn in a clockwise
direction with a dedicated
industrial tool (fine hexagon
wrench).
Nothing is shown on a display→ Please refer to the user’s
manual ” for setting “
If electrodes are broken→
Please call our customer
support.
If the lid can not be close enough →
If the apparatus make a strange sound
continuously different from usual during
a measurement →
Please turn off the power
switch at once, call our
customer support.
