Cleveland
™
P
roject ________________________________
I
tem __________________________________
Quantity _______________________________
FCSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
GAS KETTLES
MODELS: c KGL-40-T c KGL-80-T
c KGL-60-T
Cleveland Standard Features
n H
igh efficiency Power Burner Heating System (62% to
65% efficiency)
n Fast Heat-up and Recovery Time, 140M BTU’s on 40 gallon
models, 190M BTU’s on 60 gallon and larger
n Insulated Heat Exchanger
n Automatic Ignition System
n Steam Jacket permanently filled with treated, distilled water.
Venting and/or refilling not required.
n Solid State Controls, for Temperature and Low Water Safety,
in a plug-in Control Module
n Control Panel includes:
n
Precise, consistent temperature control: less than
n
± 1°C variance (ideal for simmering).
n
L.E.D. Indicators for Heat Cycle and Low Water Warning.
n
Power
“on/off” Switch
n Front mounted combination Pressure/Vacuum Gauge
n Type 304 Stainless Steel with #4 finish on kettle and supports
n Tilt Mechanism of roller bearings and case hardened
self-locking worm and segment gear
n Support Legs with level adjustable feet, flanged for floor bolting
n 50 psi Steam Jacket Rating and Safety Valve
n Standard voltage is 115 volts, 60 Hz, single-phase,
supplied with cord and plug
n Standard for natural gas operation
n T
ypical approvals include
AGA, CSA, CE, NSF and
ASME
Options & Accessories
p Type 316 Stainless Steel Kettle Liner for high acid food
products (316)
p Pan Carrier (PCK)
p Flow Diverter (FD)
p Food Strainer (FS)
p Kettle Markings (KM)
p Cooking Baskets and Tri-Basket Supports (BS and TBS)
p Drain Strainers (DS-)
p Faucet Mounting Bracket (FBKT)
p 2˝ or 3" diameter Tangent Draw-Off Valve with Drain Strainer
(TD2 or
TD3*), *TD3 for 60 and 80 gallon only and will raise
height of kettle by 5-5/8" (143mm)
p 3" diameter Butterfly Valve (BV3)
Shall be CLEVELAND, Gas-Fired Tilting Kettle, Model KGL- _____ T;
_____ gallons, 2⁄3 Steam Jacketed, Power Burner Heating System,
Insulated Heat Exchanger, 50 psi Steam Jacket Rating. Infinite
Variable Temperature Control, L.E.D. indicators for Heat Cycle and
Low Water Warning, Automatic Ignition System.
p Spring-assisted, hinged, rotatable, domed Stainless
Steel Cover (CHS-)
p Hot and Cold Water Faucet with Swing Spout (DPK)
p Kettle Accessory Kit (KAK) includes:
p Clean-up Brush(CB) p 36” Kettle Paddle (KP)
p 36” Kettle Whip(KW) p 36” Kettle Brush (KB)
p Draw-of
f Brush (DB)
p 24 oz. Ladle (KL)
p Automatic Water Meter (GMF or LMF)
p Measuring Strip (MS)
p Option for Propane Gas operation
p Correctional Package
p Heat Deflector Shield (HS001)
Short Form Specifications
Shown with optional Spring Assisted
Cover and 2" T
angent Draw-Of
f V
alve
LEG TYPE, GAS-FIRED KETTLES
TILTING, 2⁄3 STEAM JACKETED
“SPLASH PROOF SERIES”
40, 60, or 80 GALLONS (150, 225, or 300 LITERS)
SECT. IX PAGE 7
0707
