Aftron Brand's Products

Cleveland

™

roject ________________________________

tem __________________________________

Quantity _______________________________

CSI Section ____________________________

pproval _______________________________

Date __________________________________

1333 East 179 St.,

Cleveland, Ohio, U.S.A. 44110

Tel: 1-216-481-4900

Fax: 1-216-481-3782

Web Site: www.ClevelandRange.com

Email: Steam@ClevelandRange.com

ELECTRIC KETTLES

SECT. VIII PAGE 9

0707

Cleveland Standard Features

Self-contained, easily installed - needs only an electrical hook-up

n Steam jacket filled with treated water, venting and/or refilling is

not required

n Accurate, consistant solid state temperature controls (mechani-

cal thermostate not as accurate) - less than ±1°C variance

(ideal for simmering). Operating temperature range from 145° -

260°F (63°C - 127°C)

Control panel includes:

• LED indicator for heat cycle • LED indicator for low water

• Power ON/OFF switch • Adjustable temperature control dial

n Water resistant controls, splash-proof construction

n Large pouring lip for high capacity and chunky products

n Re-inforced rolled rim design prevents damage to kettle rim,

eliminates "bar rim designs"

n Welded-in heating elements, (holds vacuum better, won't leak

or loose water)

n Easily cleaned: kettle and all exterior surfaces are of type 304

stainless steel with an #4 finish

n Rear mounted easy access pressure gauge and pressure relief

valve to prevent tampering. Color coded easy to read pressure

gauge with "green" and "vent air zone"

n 50 psi steam jacket rating for higher cooking temperatures

n 50 psi safety valve

Solid state water level control (no sight glass gauge to break or leak)

n Splash proof element cover with a double gasket seal

n Tilt mechanism of roller bearings and case hardened

self-locking worm and segment gear

1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolt-

ing

n Standard voltage is 208-240 volts, 60 Hz, 3-phase, 3-wire

n Typical approvals include UL., CSA, CE, NSF and ASME

Options & Accessories

Spring-assisted, hinged, rotatable, domed Stainless Steel Cover (CHS)

2˝ or 3" diameter Tangent Draw-Off Valve (TD2 or TD3*), *TD3

for 60 gallon only and will raise height of kettle by 5-5/8" (143mm)

p Hot and Cold Water Faucet with Swing Spout and Mounting

Bracket (DPK and FBKT)

p Type 316 Stainless Steel Kettle Liner for high acid food

products (316)

p Pan Carrier (PCK)

p Flow Diverter (FD)

p Food Strainers (FS)

p Cooking Baskets and Tri-Basket Supports (BS and TBS)

p Kettle Accessory Kit (KAK) includes:

p Clean-up Brush (CB) p 36˝ Kettle Paddle (KP)

p 36˝ Kettle Whip (KW) p 36˝ Kettle Brush

p Draw-Off Brush (DB) p 24 oz. Ladle (KL)

Shall be CLEVELAND, Electric Kettle, Tri-leg mounted, self-con-

tained, tilting, Model KEL - _____ - T; _____ gallons, 2⁄3 Steam

Jacketed. Type 304 Stainless Steel Kettle and Supports. 50 psi

Steam Jacket Rating, 50 psi Safety Valve, Permanently filled Steam

Jacket, Combination Pressure/Vacuum Jacket Gauge. Splash Proof

Solid State Temperature

(±1° C) and Safety Control System in plug-

in Module including L.E.D. indicators,

p Automatic Water Meter (GMF or LMF)

p Drain Strainers (DS-)

p Water Meter Stand (SWM)

p Lift-Off Covers (CL)

p Measuring Strip (MS)

p Gallon Markings (KM)

Hot and cold or cold only Kettle Filler with 60˝ Hose (DKF-K or SKF-K)

p Swing Funnels for drain (SW)

p Alternate Mounting Systems

p High Wattage (HW) (see back page)

p Special Voltages (see back page)

p Heat Deflector Shield (HS001)

p Correctional Packages

Short For

m Specifications

Shown with optional spring-assisted

cover and 2" tangent draw-off valve

TRI-LEG, ELECTRIC KETTLES

TILTING, “

SPLASH PROOF SERIES”,

SELF-CONTAINED, 2⁄3 STEAM JACKETED,

25, 40 or 60 GALLONS (100, 150 or 225 LITERS)

MODELS: c KEL-25-T

c KEL-40-T

c KEL-60-T