19-16
Embedded Automation Computers
Features
5R+6
COMPLIANT
UNO-2170
Intel
®
Celeron
®
M Automation Computer
with 2 x LAN, 4 x COM, PC/104
Watchdog Timer Programmable 256 levels timer interval, from 1 to 255
sec
I/O Interface
Serial Ports 2 x RS-232, 2 x RS-232/422/485 with DB9 connectors
Automatic RS-485 data flow control
Serial Port Speed RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 921.6 kbps (Max.)
LAN 2 x 10/100 Base-T RJ-45 ports (Built-in boot ROM in
flash BIOS)
USB Ports 2 x USB, EHCI, Rev. 2.0 compliant
Environment
Humidity 95% @ 40° C (non-condensing)
Operating Temperature (IEC 60068-2-2, 100% CPU/ I/O loading)
-20 ~ 50° C (-4 ~ 122° F) @ 5 ~ 85% RH.
Shock Protection IEC 68 2-27
CompactFlash: 50 G @ wall mount, half sine, 11 ms
HDD: 20 G @ wall mount, half sine, 11 ms
Vibration Protection IEC 68 2-64 (Random 1 Oct./min, 1hr/axis.)
CompactFlash: 2 Grms @ 5 ~ 500 Hz,
HDD: 0.5 Grms @ 5 ~ 500 Hz
Ordering Information
UNO-2170-C00BE Celeron M 600 MHz Automation Computer
UNO-2170-C11BE Celeron M 1 GHz Automation Computer
Accessories
UNO-PCM21-AE 2 x PC/104 expansion kit for UNO-2170
UNO-FPM21-AE UNO-2000 series VESA mount kit
PCLS-DIAGAW10 Advantech Remote Monitoring & Diagnosis Utility
Onboard Celeron
®
M 600 MHz or Celeron M 1.0 GHz
Onboard 512 KB battery-backup SRAM
Two RS-232 and two RS-232/422/485 ports with automatic flow control
Two 10/100Base-T RJ-45 ports
Two USB and one type I/II PC card
PC/104 expansion slots
Windows
®
CE 5.0 & 6.0, Windows XP Embedded, and Linux ready solution
Onboard system status LED indicators
Supports Boot from LAN function
Fanless design with no internal cabling
Isolation between chassis and power ground
Specifications
General
Certifications CE, FCC class A, UL, CCC
Dimensions (W x D x H) 255 x 152 x 50 mm (10" x 6.0" x 2.0")
Enclosure Aluminum
Mounting Wallmount
Industrial Grounding Isolation between chassis and power ground
Power Consumption 24 W (Typical)
Power Requirements 9 ~ 36 V
DC
(e.g +24 V @ 2 A) (Min. 48 W), AT
Weight 1.6 kg
OS Support WES Windows XP Embedded, Windows 2000/XP,
Windows CE 5.0 & 6.0, Linux, QNX
System Design Fanless with no internal cabling
Remote Management Built-in Advantech DiagAnywhere agent on Windows
CE / XPe
System Hardware
CPU Celeron M 600 MHz, Celeron M 1.0 GHz
Memory 256 MB/512 MB DDR SDRAM built-in
Battery Backup SRAM 512 KB
Indicators LEDs for Power, IDE, Alarm for battery backup SRAM,
LAN (Active, Status) and Serial (Tx, Rx)
Keyboard/Mouse 1 x PS/2
PC Card 1 x PC Card slot, supports CardBus (Card-32) Card
and 16-bit (PCMCIA 2.1/JEIDA4.2) card
Supports +5, +3.3 and +12 V @ 120 mA working
power
PC/104 Slot 2 x PC/104 slots (optional). Supports +5 V power
Printer Port 1 x printer port
Storage SSD: 1 x internal type I/II CompactFlash
®
slot
HDD: Build-in one 2.5" SATA HDD bracket
Display DB15 VGA connector, 1600 x 1200 @ 85 Hz
Introduction
UNO-2170 is an Automation Computer that supports PC/104 expansion, serial communication ports and several other networking interfaces. UNO-2170 supports Windows XP
Embedded OS and Windows CE 5.0 & 6.0, which offers a pre-configured image with optimized onboard device drivers. Windows XP Embedded delivers the power of the Windows
operating system in componentized form. You can seamlessly integrate your applications into Windows XP Embedded and speed up your system development with an application
ready platform that can provide a rich networking interface to fulfill diverse requirements.
