Fanless Box PCs
5-14
Features
UNO-2176
Intel
®
Pentium
®
M/Celeron
®
M Fanless Box
PC with 2 x LAN, 6 x COM, 8 x DI, 8 x DO
Onboard Pentium
®
M 1.4 GHz/Celeron
®
M 1.0 GHz
Onboard 512 KB battery-backup SRAM
Two RS-232 and four isolated RS-232/422/485 ports with automatic flow
control
8-ch Isolated DI and 8-ch Isolated DO with counter and timer
Two 10/100Base-T RJ-45 ports
Two USB ports
PC/104 expansion slots
Windows
®
CE 5.0 & 6.0, Windows XP Embedded SP2, and Linux ready
solution
Onboard system status LED indicators
Supports Boot from LAN function
Fanless design with no internal cabling
Specifications
General
Certification CE, FCC Class A, UL, CCC
Dimension (W x D x H) 255 x 152 x 59 mm (10" x 6.0" x 2.36")
Enclosure Aluminum
Mounting Wallmount
Power Consumption 24 W (Typical)
Power Requirements 9 ~ 36 V
DC
(e.g +24 V @ 2 A) (Min. 48 W), AT
Weight 2.4 kg
OS Support Windows XP Embedded, Windows 2000/XP, Windows
CE 5.0 & 6.0, Linux
System Hardware
CPU Pentium M 1.4 GHz, Celeron M 1.0 GHz
Memory 512 MB DDR SDRAM
Battery Backup SRAM 512 KB
Indicators LEDs for Power, IDE, Alarm for battery backup SRAM,
Diagnosis (programmable), LAN (Active, Status) and
Serial (Tx, Rx)
Keyboard/Mouse 1 x PS/2
PC/104 Slot PC/104 Supports +5V Power
Storage SSD: 1 x internal type I/II CompactFlash
®
slot
HDD: Build-in one 2.5" SATA/IDE HDD bracket
Display DB15 VGA connector, 1600 x 1200 @ 85 Hz
Watchdog Timer Programmable 256 levels timer interval, from 1 to 255
sec
I/O Interface
Serial Ports 2 x RS-232
2 x isolated RS-232/422/485 with DB9 connectors
2 x isolated RS-232/422/485 with 5-pin screw terminal
Automatic RS-485 data flow control
Isolation protection: 2,000 V
DC
Surge protection: 2,000 V
DC
(EFT)
Serial Port Speed (COM1, COM2) RS-232: 50 ~ 115.2 kbps,
(COM3-COM6) RS-232: 300 ~ 115.2 kbps
RS-422/485: 300 ~ 921.6 kbps (Max.)
LAN 2 x 10/100Base-T RJ-45 ports (Built-in boot ROM in
flash BIOS)
USB 2 x USB, EHCI, Rev. 2.0 compliant
Digital Inputs 8-ch wet contact
- Logic 0: 0 ~ 3 V
DC
; Logic 1: 10 ~ 50 V
DC
- 2,000 V
DC
isolation
- 2,000 V
DC
ESD protection
- 70 V
DC
over-voltage protection
- ±50 V
DC
input range and 10 kHz speed
- Interrupt handling speed: 10 kHz
Digital Outputs 8-ch DO
- 2,000 V
DC
isolation and 200 mA max/channel sink
current
- Keep output status after system hot reset
- 5 ~ 40 V
DC
output range and 10 kHz speed
Timer/Counter Timer/Counter
- Counter source: DI1 & DI3, Pulse output: DO2 & DO3
- Can be cascaded as one 32-bit counter/timer
- Down counting, preset counting value
- Timer time base: 100 kHz, 10 kHz, 1 kHz, 100 Hz
Environment
Humidity 95% @ 40° C (non-condensing)
Operating Temperature UNO-2176-C11E: -20 ~ 65° C (-4 ~ 149° F) @ 5 ~ 85% RH
UNO-2176-P11E: -20 ~ 60° C (-4 ~ 140° F) @ 5 ~ 85% RH
Operating Humidity 20 ~ 95% (non-condensing)
Shock Protection IEC 68 2-27
CompactFlash
®
: 50 G @ wall mount, half sine, 11 ms
HDD: 20 G @ wall mount, half sine, 11 ms
Vibration Protection IEC 68 2-64 (Random 1 Oct./min, 1hr/axis.)
CompactFlash
®
: 2 Grms @ 5 ~ 500 Hz,
HDD: 1 Grms @ 5 ~ 500 Hz
Ordering Information
UNO-2176-C11BE Celeron M 1 GHz, 512 MB RAM Fanless Box PC
UNO-2176-P11BE Pentium M 1.4 GHz, 512 MB RAM Fanless Box PC
Accessories
UNO-PCM22-AE 2 x PC/104 expansion kit for UNO-2100 series
UNO-FPM21-AE UNO-2000 series VESA mount kit
Introduction
UNO-2176 is an embedded automation computer that supports PC/104 expansion, serial communication ports and several other networking interfaces. UNO-2176 supports Windows
XP Embedded OS and Windows CE 5.0 & 6.0, which offers a pre-configured image with optimized onboard device drivers. Windows XP Embedded delivers the power of the Windows
operating system in componentized form. You can seamlessly integrate your applications into Windows XP Embedded and speed up your system development with an application
ready platform that can provide a rich networking interface to fulfill diverse requirements.
