AdvLinux for i486SX Manual
13
address 192.168.1.10
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
After the file is edited and saved, use ifup eth0 again to enable the
network card.
If the static IP is already used, then perform the following command to
change the IP address:
#ifconfig eth0 ***.***.***.*** (new IP address)
4.3.2.
Acquire the IP address dynamically
To acquire the IP address dynamically, edit the file accessed by
/etc/network/interface as shown below:
auto eth0
iface eth0 inet dhcp
After the file is edited and saved, use ifup eth0 again to enable the
network card.
