UNO-1140/F/FH User Manual 24
A.8 VGA Display Connector
A.9 Clear CMOS (CMOS1)
This jumper is used to erase CMOS data and reset system BIOS informa-
tion. Follow the procedures below to clear the CMOS.
1. Turn off the system.
2. Close jumper CMOS1 (2-3) to clear CMOS.
3. Remove jumper CMOS1 (2-3)
4. Turn on the system. The CMOS is now cleared and BIOS is reset to
its default setting.
Table A.8: VGA Adaptor Cable Pin Assignments
Pin Signal Name Pin Signal Name
1 RED 9 EDID Power
2 GREEN 10 GND
3BLUE 11 NC
4NC 12 NC
5 GND 13 H-SYNC
6 GND 14 V-SYNC
7GND 15 NC
8GND
Table A.9: CMOS1 setting for Clear CMOS
Configuration Function
Normal ( Default)
Clear CMOS
