15 Chapter 2
2.2 Preparing for First-time Use
Before you start to set up the panel PC system, you should have at least
the following items ready:
• Power cord (in the accessory box)
• Y-shaped connector (in the accessory box)
• Keyboard
• Mouse (for system software installation, i.e. Microsoft Windows NT,
etc.)
2.3 Installation Procedures
2.3.1 Connecting the power cord
The panel PC can only be powered by an AC electrical outlet (100 ~ 250
volts, 50 ~ 60 Hz). Be sure to always handle the power cords by holding
the plug ends only.
Follow these procedures in order:
1. Connect the female end of the power cord to the AC inlet of the
panel PC. (See Fig. 2-5.)
2. Connect the 3-pin male plug of the power cord to an electrical out-
let.
Figure 2.5: Connecting the power cord
•
AC inlet
Electrical outlet
Power cord
