2 PCA-6180 Startup Manual
The board has a number of jumpers that allow you to
configure your system to suit your application.
The table below lists the function of each of the
jumpers and connectors.
Label Function
J1 CMOS clear
J2 Watchdog timer output selection
Label Function
CN1 Primary IDE connector
CN2 Secodary IDE connector
CN3 Floppy driver connector
CN4 Parallel port
CN5 Ultra 160 SCSI connector
CN6 USB port
CN7 VGA connector
CN8 10/100Base-T Ethernet connector 1
CN9 Serial port: COM1
CN10 Serial port: COM2
CN11 PS/2 keyboard and mouse connector
CN12 External keyboard connector
CN13 Infrared (IR) connector
CN14 CPU FAN connector
CN16 Power LED and keyboard lock
CN17 External speaker
CN18 Reset connector
CN19 HDD LED connector
CN20 ATX feature connector
CN21 ATX soft power switch
CN22 H/W monitor alarm
CN23 SM bus connector
CN27 Extension I/O board connector
CN28 Extension I/O board connector
Jumpers and Connectors Jumpers and Connectors
Jumpers and Connectors Jumpers and Connectors
Jumpers and Connectors
Specifications Cont. Specifications Cont.
Specifications Cont. Specifications Cont.
Specifications Cont.
Mechanical and Environmental
• Dimensions (L x W): 338 x 122 mm
• Power supply voltage: +5 V ± 12 V
• Power requirements: 6 A @ +5 V (typical, Pentium
®
III
600 MHz)
• Operating temperature: 0 ~ 60° C (depends on CPU
used)
• Weight: 0.5 kg (weight of board)
*default setting
Note: If your system has only one unused expansion
slot to accommodate the CPU card, you can
replace the standard dual-slot bracket with the
single-slot bracket included in your PCA-6180
package.
J1: CMOS clear function
Closed pins Result
1-2 Keep CMOS data*
2-3 Clear CMOS
J2: Watchdog timer output option
Closed pins Result
1-2 IRQ11
2-3 System reset *
3 21
3
21
Software Installation Software Installation
Software Installation Software Installation
Software Installation
The CD disc contains a driver installer program that will
lead you through the installation of various device
drivers needed to take full advantage of your CPU
card. Note that:
• You must install the CSI utility before installing all the
other drivers.
• If your computer uses Windows 98SE or Windows ME,
and your CPU card has two Ethernet ports, you may
have to update the driver Windows automatically
installed the first time it detects the LAN devices. Refer
to Chapter 6 for details.
Extension I/O board
CN31 USB port 0, 1
CN32 USB port 2, 3
CN33 PS/2 mouse connector
CN34 10/100Base-T Ethernet connector 2
